Click image to view full size image
Xiamen Keyuan Plastic Co.,Ltd is one of the professional toughness pc manufacturers, you can order high quality toughness pc at good price from our factory.
PC-product Specifications
Specifications
PC plastic modified
1.high mechanical strength
2.high softening point,good wear resistance
We also can modified plastic materials according to customer's need.
| Product name | PC with toughness |
Color |
As required |
Advantage |
Competitive price,high quality,on-time delivery,free sample |
Environment friendly | |
High Heat Resistance,High impact resistance | |
Without any impurity | |
Can be reinforced with the glass fiber/toughness/flame retardant/UV stabilizer | |
Packing |
25kg/bag (also can be customized) |
PC-Product Properties
Item |
Test conditions |
Typical Characteristic |
Unit |
Testing Standard |
KY-IF-10G | ||||
Melt Flow Rate |
--- |
10.5 |
g/10min |
ASTM D-1238 |
Molding Shrinkage |
3.2mm |
10-³ |
ASTM D-955 |
|
Density |
--- |
1.2 |
--- |
ASTM D-792 |
Water Absorption |
% |
0.15 |
--- |
ASTM D-570 |
Tensile Strength |
Yield point |
62 |
Mpa |
ASTM D-638 |
Tensile Strength |
Breaking point |
69 |
Mpa |
ASTM D-638 |
Tensile elongation |
Breaking point |
130 |
% |
ASTM D-638 |
Flexural Strength |
--- |
96 |
Mpa |
ASTM D-790 |
Flexural Modulus |
--- |
2343 |
Mpa |
ASTM D-790 |
Impact strength |
23℃ (gap) |
800 |
J/M |
ASTM D-256 |
Rockwell hardness |
R |
118 |
--- |
ASTM D-785 |
Loss Factor |
60HZ |
0.0009 |
--- |
ASTM D-150 |
Loss Factor |
1MHz |
0.01 |
--- |
ASTM D-150 |
Permittivity |
60HZ |
3.17 |
--- |
ASTM D-150 |
Permittivity |
1MHz |
2.96 |
--- |
ASTM D-150 |
Volume Resistivity |
--- |
1.0×1017 |
Ohm-cm |
ASTM D-257 |
Flame Retardant |
UL94 |
HB |
--- |
UL 94 |
Flame Retardant |
--- |
1.1 |
mm |
UL 94 |
Heat distortion strength |
0.45MPa |
137 |
℃ |
ASTM D-648 |
Heat Deflection Temperature |
1.8MPa |
132 |
℃ |
ASTM D-648 |
Vicat Softening Point |
--- |
154 |
℃ |
ASTM D-1525 |
CLTE |
--- |
6.8×10-5 |
1/℃ |
E831 |
Long-term use temperature UL |
--- |
130 |
℃ |
UL746B |
Use temperature | ||||
Processing temperature : 230 - 250 °C | ||||
Mould temperature : 100 - 120 °C | ||||
Back pressure : ca.10 - 15 bar | ||||
Injection speed : medium/high | ||||
Pre-drying : necessary | ||||
PC-Product certification
PC-Productionflow
PC - Our Cooperative Customers
PC-Tranportways
E-mail: 